博易的工程師有幾個呀，請教問題太不給力了，在處理系統問題沒有文華財經給力啊？ [博易POBO]
咨詢內容：
1.
AA跨:=(MOD(DAYBARPOS,15)=0||ISLASTBAR||REFX(DAYBARPOS=1,1));
N跨:=(BARSLAST(MOD(DAYBARPOS,15)=1)+1);
OO跨:=(REF(O,N跨-1));
CC跨:=(VALUEWHEN(AA跨,C));
HH跨:=(VALUEWHEN(AA跨,HHV(H,N跨)));
LL跨:=(VALUEWHEN(AA跨,LLV(L,N跨)));
DRAWLINE(AA跨,CC跨,CC跨>=OO跨,OO跨,COLORYELLOW),LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,CC跨,N跨-1,AA跨&&CC跨>=OO跨,OO跨,N跨-1,0),COLORYELLOW,LINETHICK2;
DRAWSL(AA跨&&CC跨>=OO跨,CC跨,0,-N跨+1,0,COLORYELLOW),LINETHICK2;
DRAWSL(AA跨&&CC跨>=OO跨,OO跨,0,-N跨+1,0,COLORYELLOW),LINETHICK2;
DRAWLINE(AA跨,CC跨,CC跨<OO跨,OO跨,COLORGREEN),LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,CC跨,N跨-1,AA跨&&CC跨<OO跨,OO跨,N跨-1,0),COLORGREEN,LINETHICK2;
DRAWSL(AA跨&&CC跨<OO跨,CC跨,0,-N跨+1,0,COLORGREEN),LINETHICK2;
DRAWSL(AA跨&&CC跨<OO跨,OO跨,0,-N跨+1,0,COLORGREEN),LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,HH跨,(N跨-1)/2,AA跨&&CC跨>=OO跨,CC跨,(N跨-1)/2,0),COLORYELLOW,LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,LL跨,(N跨-1)/2,AA跨&&CC跨>=OO跨,OO跨,(N跨-1)/2,0),COLORYELLOW,LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,HH跨,(N跨-1)/2,AA跨&&CC跨<OO跨,OO跨,(N跨-1)/2,0),COLORGREEN,LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,LL跨,(N跨-1)/2,AA跨&&CC跨<OO跨,CC跨,(N跨-1)/2,0),COLORGREEN,LINETHICK2;
2//大K中分線
AA中分:=(VALUEWHEN(H-L>60*MINPRICE,(H+L)/2));
BB中分:=(MAX(C,O)>AA中分&&MIN(C,O)<AA中分&&COUNT(MAX(C,O)>AA中分&&MIN(C,O)<AA中分,BARSLAST(H-L>60*MINPRICE)+1)=1);
DRAWSL(REFX1(BB中分,1)||ISLASTBAR,AA中分,0,-BARSLAST(H-L>60*MINPRICE),0,COLORRED),DASH;
?3.
//
輪回線屬性開關:=0;//1
均線顯示開關:=0;//1
角度線顯示開關:=0;//1
輪低高線顯示開關:=1;//1
比較線顯示開關:=0;
空間分割開關:=1;
短期均線周期:=5;
中期均線周期:=13;
長期均線周期:=120;
超長期均線周期:=250;
時間窗開關:=0;//3
幅度:=40;
DEA:=(EMA(EMA(CLOSE,12)-EMA(CLOSE,26),9)),LINETHICK1;
輪回DIFF:=(EMA(C,12)-EMA(C,26));
輪回DEA:=(EMA(輪回DIFF,9));
上穿S:=CROSS(輪回DEA,0);
下穿S:=CROSS(0,輪回DEA);
上穿:=上穿SANDREF(下穿S,1)=0ANDREFX(下穿S,1)=0;
下穿:=下穿SANDREF(上穿S,1)=0ANDREFX(上穿S,1)=0;
上穿周期:=BARSLAST(上穿);
下穿周期:=BARSLAST(下穿),LINETHICK1;
低點條件:=L=LLV(L,下穿周期)AND輪回DEA<0,LINETHICK1;
最低點周期:=BARSLAST(L=LLV(L,下穿周期)AND輪回DEA<0),LINETHICK1;
最高點周期:=BARSLAST(H=HHV(H,最低點周期)),LINETHICK1;
輪高點TJ1:=下穿;
輪高點TJ2:=BACKSET(輪高點TJ1,最高點周期+1);
輪高點:=(輪高點TJ2>REF(輪高點TJ2,1)),LINETHICK1;
輪低最高點周期:=BARSLAST(H=HHV(H,上穿周期)AND輪回DEA>0),LINETHICK1;
輪低最低點周期:=BARSLAST(L=LLV(L,輪低最高點周期)),LINETHICK1;
高點條件:=L=LLV(L,輪低最高點周期),LINETHICK1;
輪低點TJ1:=上穿;
輪低點TJ2:=BACKSET(輪低點TJ1,輪低最低點周期+1);
輪低點:=(輪低點TJ2>REF(輪低點TJ2,1));
DRAWLINE1(輪高點*輪低高線顯示開關,H,輪低點*輪低高線顯示開關,L,0),DOT,COLORWHITE,LINETHICK1;//{畫下輪回線}
DRAWLINE1(輪低點*輪低高線顯示開關,L,輪高點*輪低高線顯示開關,H,0),DOT,COLORYELLOW,LINETHICK1;//{畫上輪回線}
H輪H1:=VALUEWHEN(輪高點,H);
L輪L1:=VALUEWHEN(輪低點,L);
DRAWNUMBER(輪高點,H,(H輪H1-L輪L1)/L輪L1*100,2,COLORRED),VALIGN1;
DRAWNUMBER(輪低點,L,(H輪H1-L輪L1)/L輪L1*100,2,COLORGREEN),VALIGN1;
輪回點:=輪高點OR輪低點;
NZ1:=BARSLAST(輪回點);
{最近轉折點到現在的時間,如果現在是輪回點,值為0}
NZ2:=REF(NZ1,NZ1+1)+NZ1+1;
NZ3:=REF(NZ2,NZ2)+NZ2;
NZ4:=REF(NZ2,NZ3)+NZ3;
最后點TJ:=BACKSET(ISLASTBAR,BARSLAST(輪低點OR輪高點)+1);
最后點:=最后點TJ>REF(最后點TJ,1);
輪低點斜率1:=IF(輪低點,(REF(H,NZ2)-L)/NZ2,0),LINETHICK1;
輪低點斜率2:=IF(輪低點,(REF(H,NZ2)-REF(L,NZ3))/(NZ3-NZ2),0),LINETHICK1;
輪低點斜率3:=IF(輪低點,(REF(H,NZ4)-REF(L,NZ3))/(NZ4-NZ3),0),LINETHICK1;
輪高點斜率1:=IF(輪高點,(H-REF(L,NZ2))/NZ2,0),LINETHICK1;
輪高點斜率2:=IF(輪高點,(REF(H,NZ3)-REF(L,NZ2))/(NZ3-NZ2),0),LINETHICK1;
輪高點斜率3:=IF(輪高點,(REF(H,NZ3)-REF(L,NZ4))/(NZ4-NZ3),0),LINETHICK1;
//輪低點情況
DRAWTEXT(輪低點AND輪回線屬性開關,L,'時:'),ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,NZ2,0),COLORWHITE,ALIGN0;//{顯示輪回線時間}
DRAWTEXT(輪低點AND輪回線屬性開關,L,'空:'),ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,REF(H,NZ2)-L,2),COLORWHITE,ALIGN0;//{顯示輪回線空間}
DRAWTEXT(輪低點AND輪回線屬性開關,L,'斜率:'),COLOR00FFFF,ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,輪低點斜率1*10,2),COLORWHITE,ALIGN0;//{顯示輪回線斜率}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'時:'),ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,NZ2,0),COLORWHITE,ALIGN0;//{顯示輪回線時間}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'空:'),ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,H-REF(L,NZ2),2),COLORWHITE,ALIGN0;//{顯示輪回線空間}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'斜率:'),COLOR00FF00,ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,輪高點斜率1*10,2),COLORWHITE,ALIGN0;//{顯示輪回線斜率}
最后低點TJ:=(BACKSET(ISLASTBAR,BARSLAST(輪低點)+1));
最后低點:=(最后低點TJ>REF(最后低點TJ,1));
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1,0,5),COLORYELLOW,LINETHICK1;
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1*2,0,5),COLORYELLOW,LINETHICK1,DASH;
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1/2,0,5),COLORYELLOW,LINETHICK1,DASH;
最后高點TJ:=(BACKSET(ISLASTBAR,BARSLAST(輪高點)+1));
最后高點:=(最后高點TJ>REF(最后高點TJ,1));
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1,0,5),COLORGREEN,LINETHICK1;
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1*2,0,5),COLORGREEN,LINETHICK1,DASH;
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1/2,0,5),COLORGREEN,LINETHICK1,DASH;
DRAWSL1(最后低點AND比較線顯示開關,L,輪低點斜率2,0,5),COLORWHITE,ALIGN0,LINETHICK1;
DRAWSL1(最后高點AND比較線顯示開關,H,-1*輪高點斜率2,0,5),COLORWHITE,ALIGN0,LINETHICK1;
FROMOPEN:=(IF(HOUR<12,60*(HOUR-9)-30+MINUTE,120+60*(HOUR-13)+MINUTE));
倍量TJ:=(IF(ISLASTBAR=1,V*240/FROMOPEN/REF(V,1),V/REF(V,1)));
回調量:=(IF(C>=O,0,V));
黃金線TJ:=(倍量TJ>=1.9AND倍量TJ<=3ANDREFX(C,1)>OANDREFX(C,2)>OANDREFX(C,3)>OANDREFX(回調量,1)/V<1ANDREFX(回調量,2)/V<1ANDREFX(回調量,3)/V<1);
黃金線WZ:=(MIN(MIN(REFX(C,1),REFX(C,2)),REFX(C,3)));
黃金線XS:=(IF(黃金線WZ>=C,O,黃金線WZ));
STICKLINE1(黃金線TJANDC>O,O,C,2,0),COLORYELLOW;
DRAWSL1(黃金線TJANDC>O,黃金線WZ,0,10,0),COLORYELLOW;
DRAWTEXT(黃金線TJANDC>O,黃金線WZ,'金尺線：'),COLOR00DDDD,ALIGN2;
DRAWNUMBER1(黃金線TJANDC>O,黃金線WZ,黃金線WZ,2),COLOR00DDDD,ALIGN0;
//畫空間黃金分割線
//輪低點劃線
DRAWTEXT(最后點AND輪低點AND空間分割開關,L,'【輪低點】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L,L,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,'【0.191】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,L+(REF(H,NZ2)-L)*0.191,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,'【0.382】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,L+(REF(H,NZ2)-L)*0.382,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,'【0.5】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,L+(REF(H,NZ2)-L)*0.5,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,'【0.618】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,L+(REF(H,NZ2)-L)*0.618,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,'【0.809】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,L+(REF(H,NZ2)-L)*0.809,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),'【黃金分割】'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),L+(REF(H,NZ2)-L),2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,L+(REF(H,NZ2)-L)*1.382,2),COLORWHITE,ALIGN0;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,'【上1.382】'),COLORWHITE,ALIGN2;
?//輪高點劃線
DRAWTEXT(最后點AND輪高點AND空間分割開關,H,'【輪高點】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H,H,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,'【0.191】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,H-(H-REF(L,NZ2))*0.191,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,'【0.382】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,H-(H-REF(L,NZ2))*0.382,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,'【0.5】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,H-(H-REF(L,NZ2))*0.5,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,'【0.618】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,H-(H-REF(L,NZ2))*0.618,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,'【0.809】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,H-(H-REF(L,NZ2))*0.809,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,0,0,0),COLORWHITE,ALIGN0,DOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),'【黃金分割】'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),L+(REF(H,NZ2)-L),2),COLORWHITE,ALIGN0,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
//輪高點劃線
DRAWTEXT(最后點AND輪高點AND空間分割開關,H,'【輪高點】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H,H,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,'【0.191】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,H-(H-REF(L,NZ2))*0.191,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,'【0.382】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,H-(H-REF(L,NZ2))*0.382,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,'【0.5】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,H-(H-REF(L,NZ2))*0.5,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,'【0.618】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,H-(H-REF(L,NZ2))*0.618,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,'【0.809】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,H-(H-REF(L,NZ2))*0.809,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,0,0,0),RGB(128,0,255),COLOR666666,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),'【黃金分割】'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),H-(H-REF(L,NZ2)),2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),0,0,0),RGB(128,0,255),COLOR666666,DASHDOTDOT;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,0,0,0),RGB(128,0,255),ALIGN0,DASHDOTDOT;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,H-(H-REF(L,NZ2))*1.382,2),COLOR009999,ALIGN0;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,'【下1.382】'),COLOR009999,ALIGN2;
MA(C,短期均線周期*均線顯示開關),COLORFFFFFF;
MA(C,中期均線周期*均線顯示開關),COLOR40FF00;
MA(C,長期均線周期*均線顯示開關);
MA(C,超長期均線周期*均線顯示開關);
VAR2:=IF(輪高點,1,IF(輪低點,-1,0));
A1:=BARSLAST(VAR2<>0),LINETHICK1;
A2:=REF(VAR2,A1),LINETHICK1;
AA1:=REF(A1+1,1),LINETHICK1;
AA2:=-REF(A2,1),LINETHICK1;
方向:=AA2,LINETHICK1,COLORFFFFFF;
H1:=BARSLAST(VAR2=1),LINETHICK1;
HH1:=REF(H1+1,1),LINETHICK1;
L1:=BARSLAST(VAR2=-1);
LL1:=REF(L1+1,1);
HH2:=HH1+REF(HH1,HH1),LINETHICK1;
LL2:=LL1+REF(LL1,LL1),LINETHICK1;
日期1001:=IF(方向=1,ABS(LL1-LL2),ABS(HH1-HH2)),LINETHICK1;
日期1002:=IF(方向=1,ABS(HH1-LL2),ABS(LL1-HH2)),LINETHICK1;
日期1003:=IF(方向=1,ABS(LL1-HH1),ABS(HH1-LL1)),LINETHICK1;
日期100:=IF(時間窗開關=1,日期1001,IF(時間窗開關=2,日期1002,IF(時間窗開關=3,日期1003,0))),LINETHICK1;
日期0:=IF(方向=1,LL1,HH1),LINETHICK1;
{起始時間}
時間窗:=IF(CEILING(日期100*0.382-日期0,1)>0,CEILING(日期100*0.382-日期0,1),IF(CEILING(日期100*0.500-日期0,1)>0,CEILING(日期100*0.500-日期0,1),
IF(CEILING(日期100*0.618-日期0,1)>0,CEILING(日期100*0.618-日期0,1),IF(CEILING(日期100*0.809-日期0,1)>0,CEILING(日期100*0.809-日期0,1),
IF(CEILING(日期100*1.000-日期0,1)>0,CEILING(日期100*1.000-日期0,1),
IF(CEILING(日期100*1.500-日期0,1)>0,CEILING(日期100*1.500-日期0,1),
IF(CEILING(日期100*1.618-日期0,1)>0,CEILING(日期100*1.618-日期0,1),100)))))))-1,LINETHICK1;
VERTLINE1((時間窗=1ORREF(時間窗,1)=0)ANDBARPOS>=DATACOUNT-10AND時間窗開關>0),DOT;
? 來源 程序化久久網
博易的工程師有幾個呀，請教問題太不給力了，在處理系統問題沒有文華財經給力啊？
我在文華里面有問題不說秒回吧，在上班時間里有問題都沒有超出60分鐘就能夠看見處理結果，博易的系統里面的函數是不是太少了，有好多指標都不能兼容，系統也不穩定，經常出現卡頓閃屏現象，連點擊幾下就會發脾氣給崩潰，分鐘的周期想歷史復盤沒有，有好多功能缺失，希望博易的后臺工程師去測試一下文華的后臺工程師處理提問的速度，在系統后臺處理問題這方面如果滿分是100分，我最多只給40分，系統應該多優化，要想拉期貨公司的隊伍，在后臺維護應該多給力處理系統的不足，有用戶的好評才是長久發展的根本。?
?來源:程序化99網（ www.tumamayizhan.com ）
博易技術人員： 您好，請問您的軟件是在哪里下載的？看下軟件的菜單幫助關于里的版本號是多少。不同軟件指標不兼容這是正常現象，而且博易大師和一些軟件的定位不一樣，指標系統并不會什么函數都增加。博易大師5是個穩定的產品，如果您說系統不穩定，經常卡頓閃屏，這個問題確實目前沒有戶反饋，如果您那里真有這個現象，我們需要立刻處理，但是上述情況也和電腦的系統和配置有關系，您能否描述下您的情況，謝謝。 轉博易用請老師幫忙修改1.
AA跨:=(MOD(DAYBARPOS,15)=0||ISLASTBAR||REFX(DAYBARPOS=1,1));
N跨:=(BARSLAST(MOD(DAYBARPOS,15)=1)+1);
OO跨:=(REF(O,N跨-1));
CC跨:=(VALUEWHEN(AA跨,C));
HH跨:=(VALUEWHEN(AA跨,HHV(H,N跨)));
LL跨:=(VALUEWHEN(AA跨,LLV(L,N跨)));
DRAWLINE(AA跨,CC跨,CC跨>=OO跨,OO跨,COLORYELLOW),LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,CC跨,N跨-1,AA跨&&CC跨>=OO跨,OO跨,N跨-1,0),COLORYELLOW,LINETHICK2;
DRAWSL(AA跨&&CC跨>=OO跨,CC跨,0,-N跨+1,0,COLORYELLOW),LINETHICK2;
DRAWSL(AA跨&&CC跨>=OO跨,OO跨,0,-N跨+1,0,COLORYELLOW),LINETHICK2;
DRAWLINE(AA跨,CC跨,CC跨<OO跨,OO跨,COLORGREEN),LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,CC跨,N跨-1,AA跨&&CC跨<OO跨,OO跨,N跨-1,0),COLORGREEN,LINETHICK2;
DRAWSL(AA跨&&CC跨<OO跨,CC跨,0,-N跨+1,0,COLORGREEN),LINETHICK2;
DRAWSL(AA跨&&CC跨<OO跨,OO跨,0,-N跨+1,0,COLORGREEN),LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,HH跨,(N跨-1)/2,AA跨&&CC跨>=OO跨,CC跨,(N跨-1)/2,0),COLORYELLOW,LINETHICK2;
DRAWLINE3(AA跨&&CC跨>=OO跨,LL跨,(N跨-1)/2,AA跨&&CC跨>=OO跨,OO跨,(N跨-1)/2,0),COLORYELLOW,LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,HH跨,(N跨-1)/2,AA跨&&CC跨<OO跨,OO跨,(N跨-1)/2,0),COLORGREEN,LINETHICK2;
DRAWLINE3(AA跨&&CC跨<OO跨,LL跨,(N跨-1)/2,AA跨&&CC跨<OO跨,CC跨,(N跨-1)/2,0),COLORGREEN,LINETHICK2;
2//大K中分線
AA中分:=(VALUEWHEN(H-L>60*MINPRICE,(H+L)/2));
BB中分:=(MAX(C,O)>AA中分&&MIN(C,O)<AA中分&&COUNT(MAX(C,O)>AA中分&&MIN(C,O)<AA中分,BARSLAST(H-L>60*MINPRICE)+1)=1);
DRAWSL(REFX1(BB中分,1)||ISLASTBAR,AA中分,0,-BARSLAST(H-L>60*MINPRICE),0,COLORRED),DASH;
?3.
//
輪回線屬性開關:=0;//1
均線顯示開關:=0;//1
角度線顯示開關:=0;//1
輪低高線顯示開關:=1;//1
比較線顯示開關:=0;
空間分割開關:=1;
短期均線周期:=5;
中期均線周期:=13;
長期均線周期:=120;
超長期均線周期:=250;
時間窗開關:=0;//3
幅度:=40;
DEA:=(EMA(EMA(CLOSE,12)-EMA(CLOSE,26),9)),LINETHICK1;
輪回DIFF:=(EMA(C,12)-EMA(C,26));
輪回DEA:=(EMA(輪回DIFF,9));
上穿S:=CROSS(輪回DEA,0);
下穿S:=CROSS(0,輪回DEA);
上穿:=上穿SANDREF(下穿S,1)=0ANDREFX(下穿S,1)=0;
下穿:=下穿SANDREF(上穿S,1)=0ANDREFX(上穿S,1)=0;
上穿周期:=BARSLAST(上穿);
下穿周期:=BARSLAST(下穿),LINETHICK1;
低點條件:=L=LLV(L,下穿周期)AND輪回DEA<0,LINETHICK1;
最低點周期:=BARSLAST(L=LLV(L,下穿周期)AND輪回DEA<0),LINETHICK1;
最高點周期:=BARSLAST(H=HHV(H,最低點周期)),LINETHICK1;
輪高點TJ1:=下穿;
輪高點TJ2:=BACKSET(輪高點TJ1,最高點周期+1);
輪高點:=(輪高點TJ2>REF(輪高點TJ2,1)),LINETHICK1;
輪低最高點周期:=BARSLAST(H=HHV(H,上穿周期)AND輪回DEA>0),LINETHICK1;
輪低最低點周期:=BARSLAST(L=LLV(L,輪低最高點周期)),LINETHICK1;
高點條件:=L=LLV(L,輪低最高點周期),LINETHICK1;
輪低點TJ1:=上穿;
輪低點TJ2:=BACKSET(輪低點TJ1,輪低最低點周期+1);
輪低點:=(輪低點TJ2>REF(輪低點TJ2,1));
DRAWLINE1(輪高點*輪低高線顯示開關,H,輪低點*輪低高線顯示開關,L,0),DOT,COLORWHITE,LINETHICK1;//{畫下輪回線}
DRAWLINE1(輪低點*輪低高線顯示開關,L,輪高點*輪低高線顯示開關,H,0),DOT,COLORYELLOW,LINETHICK1;//{畫上輪回線}
H輪H1:=VALUEWHEN(輪高點,H);
L輪L1:=VALUEWHEN(輪低點,L);
DRAWNUMBER(輪高點,H,(H輪H1-L輪L1)/L輪L1*100,2,COLORRED),VALIGN1;
DRAWNUMBER(輪低點,L,(H輪H1-L輪L1)/L輪L1*100,2,COLORGREEN),VALIGN1;
輪回點:=輪高點OR輪低點;
NZ1:=BARSLAST(輪回點);
{最近轉折點到現在的時間,如果現在是輪回點,值為0}
NZ2:=REF(NZ1,NZ1+1)+NZ1+1;
NZ3:=REF(NZ2,NZ2)+NZ2;
NZ4:=REF(NZ2,NZ3)+NZ3;
最后點TJ:=BACKSET(ISLASTBAR,BARSLAST(輪低點OR輪高點)+1);
最后點:=最后點TJ>REF(最后點TJ,1);
輪低點斜率1:=IF(輪低點,(REF(H,NZ2)-L)/NZ2,0),LINETHICK1;
輪低點斜率2:=IF(輪低點,(REF(H,NZ2)-REF(L,NZ3))/(NZ3-NZ2),0),LINETHICK1;
輪低點斜率3:=IF(輪低點,(REF(H,NZ4)-REF(L,NZ3))/(NZ4-NZ3),0),LINETHICK1;
輪高點斜率1:=IF(輪高點,(H-REF(L,NZ2))/NZ2,0),LINETHICK1;
輪高點斜率2:=IF(輪高點,(REF(H,NZ3)-REF(L,NZ2))/(NZ3-NZ2),0),LINETHICK1;
輪高點斜率3:=IF(輪高點,(REF(H,NZ3)-REF(L,NZ4))/(NZ4-NZ3),0),LINETHICK1;
//輪低點情況
DRAWTEXT(輪低點AND輪回線屬性開關,L,'時:'),ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,NZ2,0),COLORWHITE,ALIGN0;//{顯示輪回線時間}
DRAWTEXT(輪低點AND輪回線屬性開關,L,'空:'),ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,REF(H,NZ2)-L,2),COLORWHITE,ALIGN0;//{顯示輪回線空間}
DRAWTEXT(輪低點AND輪回線屬性開關,L,'斜率:'),COLOR00FFFF,ALIGN2;
DRAWNUMBER1(輪低點AND輪回線屬性開關,L,輪低點斜率1*10,2),COLORWHITE,ALIGN0;//{顯示輪回線斜率}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'時:'),ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,NZ2,0),COLORWHITE,ALIGN0;//{顯示輪回線時間}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'空:'),ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,H-REF(L,NZ2),2),COLORWHITE,ALIGN0;//{顯示輪回線空間}
DRAWTEXT(輪高點AND輪回線屬性開關,H,'斜率:'),COLOR00FF00,ALIGN2;
DRAWNUMBER1(輪高點AND輪回線屬性開關,H,輪高點斜率1*10,2),COLORWHITE,ALIGN0;//{顯示輪回線斜率}
最后低點TJ:=(BACKSET(ISLASTBAR,BARSLAST(輪低點)+1));
最后低點:=(最后低點TJ>REF(最后低點TJ,1));
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1,0,5),COLORYELLOW,LINETHICK1;
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1*2,0,5),COLORYELLOW,LINETHICK1,DASH;
DRAWSL1(最后低點AND角度線顯示開關,L,輪低點斜率1/2,0,5),COLORYELLOW,LINETHICK1,DASH;
最后高點TJ:=(BACKSET(ISLASTBAR,BARSLAST(輪高點)+1));
最后高點:=(最后高點TJ>REF(最后高點TJ,1));
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1,0,5),COLORGREEN,LINETHICK1;
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1*2,0,5),COLORGREEN,LINETHICK1,DASH;
DRAWSL1(最后高點AND角度線顯示開關,H,-輪高點斜率1/2,0,5),COLORGREEN,LINETHICK1,DASH;
DRAWSL1(最后低點AND比較線顯示開關,L,輪低點斜率2,0,5),COLORWHITE,ALIGN0,LINETHICK1;
DRAWSL1(最后高點AND比較線顯示開關,H,-1*輪高點斜率2,0,5),COLORWHITE,ALIGN0,LINETHICK1;
FROMOPEN:=(IF(HOUR<12,60*(HOUR-9)-30+MINUTE,120+60*(HOUR-13)+MINUTE));
倍量TJ:=(IF(ISLASTBAR=1,V*240/FROMOPEN/REF(V,1),V/REF(V,1)));
回調量:=(IF(C>=O,0,V));
黃金線TJ:=(倍量TJ>=1.9AND倍量TJ<=3ANDREFX(C,1)>OANDREFX(C,2)>OANDREFX(C,3)>OANDREFX(回調量,1)/V<1ANDREFX(回調量,2)/V<1ANDREFX(回調量,3)/V<1);
黃金線WZ:=(MIN(MIN(REFX(C,1),REFX(C,2)),REFX(C,3)));
黃金線XS:=(IF(黃金線WZ>=C,O,黃金線WZ));
STICKLINE1(黃金線TJANDC>O,O,C,2,0),COLORYELLOW;
DRAWSL1(黃金線TJANDC>O,黃金線WZ,0,10,0),COLORYELLOW;
DRAWTEXT(黃金線TJANDC>O,黃金線WZ,'金尺線：'),COLOR00DDDD,ALIGN2;
DRAWNUMBER1(黃金線TJANDC>O,黃金線WZ,黃金線WZ,2),COLOR00DDDD,ALIGN0;
//畫空間黃金分割線
//輪低點劃線
DRAWTEXT(最后點AND輪低點AND空間分割開關,L,'【輪低點】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L,L,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,'【0.191】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,L+(REF(H,NZ2)-L)*0.191,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.191,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,'【0.382】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,L+(REF(H,NZ2)-L)*0.382,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,'【0.5】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,L+(REF(H,NZ2)-L)*0.5,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.5,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,'【0.618】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,L+(REF(H,NZ2)-L)*0.618,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.618,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,'【0.809】↑'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,L+(REF(H,NZ2)-L)*0.809,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),'【黃金分割】'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),L+(REF(H,NZ2)-L),2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,L+(REF(H,NZ2)-L)*1.382,2),COLORWHITE,ALIGN0;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*1.382,'【上1.382】'),COLORWHITE,ALIGN2;
?//輪高點劃線
DRAWTEXT(最后點AND輪高點AND空間分割開關,H,'【輪高點】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H,H,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,'【0.191】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,H-(H-REF(L,NZ2))*0.191,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,'【0.382】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,H-(H-REF(L,NZ2))*0.382,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,'【0.5】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,H-(H-REF(L,NZ2))*0.5,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,'【0.618】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,H-(H-REF(L,NZ2))*0.618,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,'【0.809】↓'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,H-(H-REF(L,NZ2))*0.809,2),COLORWHITE,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L)*0.809,0,0,0),COLORWHITE,ALIGN0,DOT;
DRAWTEXT(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),'【黃金分割】'),COLORWHITE,ALIGN2;
DRAWNUMBER1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),L+(REF(H,NZ2)-L),2),COLORWHITE,ALIGN0,ALIGN0;
DRAWSL1(最后點AND輪低點AND空間分割開關,L+(REF(H,NZ2)-L),0,0,0),COLORWHITE,ALIGN0,DASHDOTDOT;
//輪高點劃線
DRAWTEXT(最后點AND輪高點AND空間分割開關,H,'【輪高點】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H,H,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,'【0.191】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,H-(H-REF(L,NZ2))*0.191,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.191,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,'【0.382】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,H-(H-REF(L,NZ2))*0.382,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.382,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,'【0.5】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,H-(H-REF(L,NZ2))*0.5,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.5,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,'【0.618】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,H-(H-REF(L,NZ2))*0.618,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.618,0,0,0),COLOR666666,DOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,'【0.809】↓'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,H-(H-REF(L,NZ2))*0.809,2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*0.809,0,0,0),RGB(128,0,255),COLOR666666,DASHDOTDOT;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),'【黃金分割】'),COLOR009999,ALIGN2;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),H-(H-REF(L,NZ2)),2),COLOR009999,ALIGN0;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2)),0,0,0),RGB(128,0,255),COLOR666666,DASHDOTDOT;
DRAWSL1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,0,0,0),RGB(128,0,255),ALIGN0,DASHDOTDOT;
DRAWNUMBER1(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,H-(H-REF(L,NZ2))*1.382,2),COLOR009999,ALIGN0;
DRAWTEXT(最后點AND輪高點AND空間分割開關,H-(H-REF(L,NZ2))*1.382,'【下1.382】'),COLOR009999,ALIGN2;
MA(C,短期均線周期*均線顯示開關),COLORFFFFFF;
MA(C,中期均線周期*均線顯示開關),COLOR40FF00;
MA(C,長期均線周期*均線顯示開關);
MA(C,超長期均線周期*均線顯示開關);
VAR2:=IF(輪高點,1,IF(輪低點,-1,0));
A1:=BARSLAST(VAR2<>0),LINETHICK1;
A2:=REF(VAR2,A1),LINETHICK1;
AA1:=REF(A1+1,1),LINETHICK1;
AA2:=-REF(A2,1),LINETHICK1;
方向:=AA2,LINETHICK1,COLORFFFFFF;
H1:=BARSLAST(VAR2=1),LINETHICK1;
HH1:=REF(H1+1,1),LINETHICK1;
L1:=BARSLAST(VAR2=-1);
LL1:=REF(L1+1,1);
HH2:=HH1+REF(HH1,HH1),LINETHICK1;
LL2:=LL1+REF(LL1,LL1),LINETHICK1;
日期1001:=IF(方向=1,ABS(LL1-LL2),ABS(HH1-HH2)),LINETHICK1;
日期1002:=IF(方向=1,ABS(HH1-LL2),ABS(LL1-HH2)),LINETHICK1;
日期1003:=IF(方向=1,ABS(LL1-HH1),ABS(HH1-LL1)),LINETHICK1;
日期100:=IF(時間窗開關=1,日期1001,IF(時間窗開關=2,日期1002,IF(時間窗開關=3,日期1003,0))),LINETHICK1;
日期0:=IF(方向=1,LL1,HH1),LINETHICK1;
{起始時間}
時間窗:=IF(CEILING(日期100*0.382-日期0,1)>0,CEILING(日期100*0.382-日期0,1),IF(CEILING(日期100*0.500-日期0,1)>0,CEILING(日期100*0.500-日期0,1),
IF(CEILING(日期100*0.618-日期0,1)>0,CEILING(日期100*0.618-日期0,1),IF(CEILING(日期100*0.809-日期0,1)>0,CEILING(日期100*0.809-日期0,1),
IF(CEILING(日期100*1.000-日期0,1)>0,CEILING(日期100*1.000-日期0,1),
IF(CEILING(日期100*1.500-日期0,1)>0,CEILING(日期100*1.500-日期0,1),
IF(CEILING(日期100*1.618-日期0,1)>0,CEILING(日期100*1.618-日期0,1),100)))))))-1,LINETHICK1;
VERTLINE1((時間窗=1ORREF(時間窗,1)=0)ANDBARPOS>=DATACOUNT-10AND時間窗開關>0),DOT;
? 來源 程序化久久網
有思路，想編寫各種指標公式，交易模型，選股公式，還原公式的朋友
可聯系技術人員 QQ: 262069696 或微信號：cxh99cxh99 進行 有償收費 編寫！
(注：由于人數限制，QQ或微信請選擇方便的一個聯系我們就行，加好友時請簡單備注下您的需求，否則無法通過。謝謝您！)
相關文章
-
沒有相關內容